HOPPE

Hoppe 8778163 HL S9000 MP Manual Gear, Tongue Version with 16mm FaceplateTongue Version, Multi-point Lock bottom gear for Active Door - Deadbolt an...

Part Number 8778555 Manual Version, Top Extension, Faceplate Width: 5/8 inch (16mm) Material: Stainless Steel Extension Length 54.92 inches, Overal...

360 degree non-keyed Inactive door profile cylinder with Cresent KnobUsed on doors that are 1-3/4 inch or thicker.Overall housing Length: 40.5 mm /...

Bottom Gear, HLS9000 Shootbolt Version, Manual Locking for Active Door.    Faceplate Width: 5/8 inch ( 16mm) Backset: 1-3/8 inch (35mm) Deadbolt Th...

16mm Hoppe Swing Hook and Shootbolt,  Bottom Gear Assembly with Shootbolt attached.Faceplate: 5/8" (16mm)Backset: 1-3/8" (35mm)Deadbolt Throw: 1" (...

Non-keyed active or inactive L-handles for sliding patio doorsUsed primarily with the Fuhr single and Double sliding door lock with 3 hooksNon-Hand...

Hoppe Cylinder cap removal toolUsed to remove plastic cap from CES cylinders

Plastic cylinder cap for Hoppe / CES Euro Profile Locks.Material: Gray PlasticSold Each 

Dummy HOPPE Multi-point handle set with Dallas lever in satin nickel.The Dallas series features straight, modern lines providing a contemporary aes...

Active HOPPE Multi-point handle set with Dallas lever in satin nickel.The Dallas series features straight, modern lines providing a contemporary ae...

Active HOPPE Multi-point handle set with Dallas lever in matte black.The Dallas series features straight, modern lines providing a contemporary aes...

Fuhr inline-gear multipoint lock (2 or 3 piece lock case).For 6-foot 8-inch active sliding patio door.Spindle Diameter: 5/16 inch (8 mm)Face Plate ...

Multipoint Fuhr sliding patio door lock with 3 hooks for 6-foot 8-inch Door.  Face Plate Measurements: 5/8 Wide x 64-5/8 inches long. Hooks: three ...

Backset 1 3/16" Fuhr sliding door lock 5/8" plate. 

DISCONTINUED Fuhr Flat strike plate for Inline sliding door with 3 hooksStrike Type: Square ends Sh dimple for auto releaseStrike Shape: FlatStrike...

M112P/2172N Keyed Active, Polished ChromeHandle series: MunchenBackplate style: Traditional (2172N)Screw hole spacing: 9-1/8 inchesFaceplate height...

Hoppe - New Style Sliding Door multipoint Lock Hardware Trim Handle set.Active / Keyed handle for Hoppe Multi-Point locking sliding doors with 2 ho...

16mm Hoppe Swing Hook and Shootbolt,  Bottom Gear Assembly with Shootbolt attached.Faceplate: 5/8" (16mm)Backset: 2-3/8" (60mm)Deadbolt Throw: 1" (...

S4107 Hoppe Set Screw For Cylinder  Related Parts Sold Separately: Part Number S4102 - Hoppe Full Cylinder Part Number S4103 - Hoppe Short Cylin...

Hoppe Latch and Dead Bolt Strike with Curved Lip for 1-3/4 inch thick door.Hoppe Item Number: p7012011e019 / PC0010NSize: 1.70 x 8.82 inchesHanded:...

Hoppe Latch and Dead Bolt Strike with Curved Lip for 1-3/4 inch thick door.Hoppe Item Number: p7012011e019 / PC0010NSize: 1.70 x 8.82 inchesHanded:...

16mm Hoppe Swing Hook and Shootbolt Manual, Bottom Gear Assembly with Shootbolt attached.Faceplate: 5/8" (16mm)Backset: 1-3/4" (45mm)Deadbolt Throw...